Before operation - vcr part, How to using the main menu, Tuning in tv stations automatically – Porter-Cable DVP 3100V User Manual
Page 14: English, Press system menu to return to a tv picture, Press 1 1 to turn on your vcr
English
Before Operation - VCR part
14
How to using the main menu
This VCR can easily be programmed by using the menus
displayed on screen.
The menus are controlled from the Remote Control
Handset.
1
Switch on your TV set and video recorder by pressing the
1
1 button.
2
Press SYSTEM MENU button.
The main menu will appear on the TV screen.
● REC - Timer recording setting (see p. 24).
● PR SET - Manual tuning setting (see p. 15).
● ACMS - ACMS (Automatic Channel Memory System)
(see p. 14).
● SET - Date & clock setting (see p. 13).
● SYSTEM - To set the Colour TV System (see p. 13).
RF AUDIO - To select the channel of audio output
according to your TV type (“I/I” for PAL
I/I TV, “B/G” for PAL B/G TV, “D/K” for
PAL D/K TV) (see p. 13).
● Dr. - To check a problem with your VCR (see p. 34).
● AUDIO - To select the channel for audio output
(see p. 35).
● F.OSD ON/OFF - To display the operational
mode of your VCR (see p. 34).
● 16:9/4:3 - To select the aspect ratio of your TV
(see p. 35).
● DECODER - To use a pay-TV decoder (or Satellite)
with your VCR (see p. 35).
● OPR - To improve the playback picture (see p. 21).
● NIC - To activate or deactivate the NICAM digital
sound (see p. 35).
Tip
You can change the menu language on the DVD setup menu.
(See the Menu Language on page 18.)
3
Press 1 and 2 to select the desired menu.
Press OK and use 3 or 4 to select.
4
Press SYSTEM MENU to return to a TV picture.
Tuning in TV Stations
Automatically
If the TV broadcast signal is weak your VCR may not
detect the necessary information and will not be able to
store them correctly.To overcome this problem please
turn to the MANUAL TUNING section on page 15.
1
Press 1
1 to turn on your VCR.
2
Press SYSTEM MENU button.
The main menu will appear on the TV screen.
Press 1 or 2 to select the ACMS.
Press OK.
3
Press OK again to start the automatic tuning process.
4
The TV STATION TABLE will appear when tuning is
complete.
Press SYSTEM MENU to save your settings.
02
C03
00
03
C04
00
04
C05
00
05
C06
00
06
C07
00
07
C08
00
08
C09
00
01
C02
00
OK i
,
DELETE :
MOVE :
PSET
R
01
C02
00
02
C03
00
03
C04
00
E
S
i
Pr-12
ACMS
OK i
Pr-12
ACMS
ACMS
REC
SYS
OSD
ON
OFF
OSD
f
PSET
R
1 2
SET
ACMS
Pr-12
ACMS
Pr-12
OK i
NIC
DECO-
DER
+
-
AUD
REC
REC
OK i
SYS
PSET
R
Pr-12
ACMS
OSD
ON
OFF
OSD
f
1 2
SET
NIC
DECO-
DER
+
-
AUD