Pioneer Elite DV-46AV - Manual (Page 41)

Initial Settings menu 07
41
En
Video Output settings
Setting Option What it means
TV Screen
(This setting effective for
analog and HDMI video
output. See also
Screen
sizes and disc formats
on page 53.)
4:3 (Letter Box) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide) Set if you have a widescreen TV.
Component Out Interlace Set if your TV is not compatible with progressive scan video.
Progressive Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). See also
Switching
the video output to interlace using the remote controls on
page 14.
Note that progressive scan video is only output from the
component video jacks.
HDMI Resolution
a
(Default changes
with TV format (PAL/
NTSC).)
a. You can also use the HDMI RESOLUTION button on the remote control to switch this setting.
1920x1080i Set if your TV supports 1920 x 1080 pixel interlace video.
1280x720p Set if your TV supports 1280 x 720 pixel progressive-scan video.
720x480p (NTSC) Set if your TV supports 720 x 480 pixel (NTSC) progressive-scan
video.
720x480i (NTSC) Set if your TV supports 720 x 480 pixel (NTSC) interlace video.
HDMI Color b
(Default changes
depending on device
connected.)
b. You can also use the HDMI COLOR button on the remote control to switch this setting.
Full range RGB If colors are weak, this gives brighter colors and deeper black.
RGB Use this setting if colors appear overly rich on the Full Range
RGB setting.
Component Outputs component video format (default setting for HDMI-
compatible devices).
DV46AV_EN.book 41 ページ ２００６年６月９日 金曜日 午後４時３３分