Patton electronic SMARTNODE 4630 - Manual (Page 15)

SmartNode 4630 overview 15
SmartNode 4630 User Manual 1 • General information
SmartNode 4630 rear panel
The SmartNode 4630 is a compact VoIP Gateway Router that supports eight VoIP calls on five ISDN BRI
ports (see
figure 2 ). The SmartNode 4630 rear panel ports are described in table 2 .
Figure 2. SN4630 rear panel
Table 2. Rear panel ports
Port Description
WAN ETH 0/0 Auto-MDX Fast-Ethernet port, RJ-45 (see figure 2 ), connects the unit to an Ethernet
WAN device (for example, a cable modem, DSL modem, or fiber modem).
LAN ETH 0/1 Auto-MDX Fast-Ethernet port, RJ-45 (see figure 2 ), connect the unit to an Ethernet
LAN (for example, a PC, printer, or wireless bridge).
BRI 0/0 ISDN BRI TE/NT port, RJ-45 socket S0 (S/T) interface (see figure 2 ), connects the
SmartNode with an ISDN device over an S/T bus, e.g. a PBX or an NT. The inter-
face may be used as fallback if connected to an NT. The port can be switched
between TE and NT mode.The interface is internally terminated with 100 Ohm.
Point-to-point or point-to-multipoint configurable. If the port is in NT mode a phantom
power supply can be switched on to supply connected phones with power.
ISDN S/T
BRI ports 0/0 – 0/4
ETH 0/0
10/100bT port
RESET
button
Life-line
ports
Power
(~120–240V, 50/60 Hz, 1A)
ISDN S/T
BRI ports 0/0 – 0/2
SN4638
SN4634
CONSOLE
RS-232 port
ETH 0/1
10/100bT port