Planet Technology FSD-804P - Manual

8-Port 10/100Mbps with 4-Port PoE Ethernet Switch
Key Feature
FSD-804P
Data Sheet
1
F
or cost saving and flexible using of PoE power provision, half of the
10/100Mbps TP ports of FSD-804P provide PoE power injector function
which is able to drive 4 IEEE 802.3af compliant powered devices.
For SOHO or department network, the Switch also provides a simple,
cost-effective, and highly reliable network connection for data as well as
power. Furthermore, it is the ideal device for bridging Ethernet to Fast
Ethernet workgroups or networks.
With data and power over Ethernet from one unit, the FSD-804P shall
reduce cables and eliminates the need for dedicated electrical outlets on
the wall, ceiling or any unreachable place. A wire carries both data and
power lowering the installation costs, simplifying the installation effort and
eliminating the need for electricians or extension cords. We are also proud
of the key feature – energy saving. With more efficient switching power
supply, the efficiency of the FSD-804P would be much better than four
linear power adapters in a long run.
Providing 4 PoE interfaces, the FSD-804P is ideal for small business and
workgroups requiring to deploy the PoE for the wireless access points,
IP-based surveillance camera or IP phones in any places easily, efficiently
and cost effective.
• 8-Port 10/100Mbps Fast Ethernet ports
• 4-Port support 48VDC power to PoE Powered Device.
• Hardware based 10/100Mbps auto-negotiation.
• Flow control for full duplex operation and back pressure for
half duplex operation
• Integrated address look-up engine, support 2K absolute MAC
addresses
• Automatic address learning and address aging
• Supports Auto MDI/MDI-X function
• LED indicators for easy network diagnostic
• Ethernet standards comply with IEEE 802.3 Ethernet, IEEE
802.3u Fast Ethernet, IEEE 802.3x Flow Control and IEEE
802.3af Power over Ethernet.
• EMI standards comply with FCC Class A, CE