Penpower TOOYA PRO - Manual (Page 3)

PENPOWER TOOYA PRO Quick Guide-
PENPOWER TOOYA PRO Quick Guide
TOOYA PRO has a wide active area design so that you can use it with your wide screen
without any distortion problems. And Windows® Vista™ supports pen features such as
note taking, handwriting recognition, and gesture recognition to give you the result you
want quickly and easily. Just follow this quick guide and enjoy your e-life with our TOOYA
PRO.
Package Contents
Hardware Introduction
Slim Tablet: Flat design TOOYA PRO is not only a tablet but also a mouse pad.
Pen: The pen is used like a normal writing pen. On the About tab, make sure the Tracking
Mode is set to Pen. You can customize the side button in the tablet setting. The pen has
a power-saving function. If the pen is not be used for more than 3 minutes, it will go into
sleep mode. The pen can be used again while you press the tip of the pen.
How to change battery and refill
1. Take off the tail cover.
2. Open the pen cover.
3. Change a new battery then close pen cover and put on tail cover.
4. Please use tweezers to draw the cartridge from the pen, then replace with a new one.
• 1 graphics tablet • 1 pen holder
• 1 pen • 2 refills
• 1 pair of tweezers • 1 Quick Guide
• 2 Driver CDs
1
2
3
4