Pioneer Inno2BK GEX-INN02B - Manual (Page 34)

Settings
Settings 67 Settings 66
Settings
FM Modulator
(for optional Car Kit use only)
Set the FM frequency that inno
transmits on.
Adjust the volume level of the
FM transmission.
FM Frequency (for optional Car Kit use only)
Your inno contains a built-in FM modulator (or FM transmitter) that allows you to listen to
whatever your inno is playing using a car FM radio. All you have to do is set your inno and
the FM radio in your car to the same frequency.
1. Place inno in the car dock.
2. Find an unused FM frequency on your FM radio. Note that FM frequency.
3. Select XM ➝ Settings ➝ FM Modulator ➝ FM Frequency.
4. Use the up and down arrow buttons to choose the same FM frequency as in step 2. You
should hear XM programming over your FM radio when your inno and radio frequencies
match.
5. Press the XM button to confirm your selection.
enginno_usergd.r2a.qxd 5/17/06 6:32 PM Page 66