Turning the off clock display on or, Setting the fm tuning step 23, Switching auto pi seek 23 – Pioneer DEH-P4900IB User Manual

Page 23: Switching the warning tone 23, Switching the auxiliary setting 23, Switching the dimmer setting 23, Operating this unit

Advertising
background image

3

Press a or b to set the date and clock.

Pressing a will increase the value of the se-
lected segment. Pressing b will decrease the
value of the selected segment.

Turning the off clock display on
or off

If the off clock display is turned on, when the
sources and the feature demo are off, the date
and clock display appears on the display.

1

Press FUNCTION to select OFF CLOCK.

2

Press a or b to turn OFF CLOCK on or

off.

Setting the FM tuning step

Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100
kHz. It may be preferable to set the tuning step
to 50 kHz when AF is on.

1

Press FUNCTION to select FM STEP.

2

Press c or d to select the FM tuning

step.
Pressing c or d will switch the FM tuning
step between 50 kHz and 100 kHz while AF or
TA is on. The selected FM tuning step will ap-
pear in the display.

Note

The tuning step remains at 50 kHz during manual
tuning.

Switching Auto PI Seek

The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.

1

Press FUNCTION to select AUTO PI.

2

Press a or b to turn AUTO PI on or off.

Switching the warning tone

If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.

1

Press FUNCTION to select

WARNING TONE.

2

Press a or b to turn WARNING TONE

on or off.

Switching the auxiliary setting

Auxiliary equipments connected to this unit
can be activated individually. Set each AUX
source to ON when using. About connecting
or using auxiliary equipments, refer to Using
the AUX source on page 25.

1

Press FUNCTION to select AUX1/AUX2.

2

Press a or b to turn AUX1/AUX2 on or

off.

Switching the dimmer setting

To prevent the display from being too bright at
night, the display is automatically dimmed
when the car

’s headlights are turned on. You

can turn the dimmer on or off.

1

Press FUNCTION to select DIMMER.

2

Press a or b to turn DIMMER on or off.

Operating this unit

En

23

English

Section

02

Advertising