Petsafe PPA00-10984 - Manual (Page 3)

4 Customer Care Center 1-800-732-2677 www.petsafe.net 5
NOTICE
If painting the pet door, it is recommended to paint it prior to installation.
For best results, use a primer for plastics before applying paint.
Step 1
Step 2
Determine Pet Door Location
1A
1B
1A Measure and mark your pet’s shoulder height on the
interior side of door.
1B Determine location for the pet door. Draw a vertical
center line through the shoulder height line using a level.
NOTICE
If homeowner’s door or other application is
not level, the pet door must be marked level to
swing properly.
Prepare Door
2A
2B
2C
2A Remove door by removing door hinge pins.
2B Place on a raised level surface such as saw horses.
Place interior side of door facing up.
Helpful Tip: Clamp down the door to prevent it
from moving.
Note: The Pet Door can be installed with the door
hanging based on your skill level.
2C Cut out the correct size template. Match the
marked lines on the door with the shoulder and center
lines on the template. Tape the template in place and
carefully trace template. Make sure to trace under-
neath tape and connect the corners. Now, remove the
template and any excess tape from the door.
NOTICE
When applying cutting template there should be a
minimum of 3” between the bottom and sides of the
door and the outer edge of the cutting template to
maintain the structural integrity of the door.
NOTICE
Cut out correct size template. For the Large, no
cutting is required. If installing in a wall, reduce cut-
out width by 1” for the Small and Medium. For the
Large reduce cut-out width by 1” and cut-out height
by 1”.
Installation Instructions
Thank you for choosing the PetSafe ® brand. You and your pet deserve a companionship that includes
memorable moments and a shared understanding together. Our products and training tools promote a
lifestyle of protection, teaching, and love—essentials that influence memories for a lifetime. If you have
any questions about our products or training your pet, please visit our website at www.petsafe.net or
contact our Customer Care Center at 1-800-732-2677.
PRODUCT WARRANTY
To get the most protection out of your warranty, please register your product within 30 days at
www.petsafe.net. By registering and keeping your receipt, you will enjoy the product’s full warranty
and should you ever need to call the Customer Care Center, we will be able to help you faster. Most
importantly, PetSafe ® will never give or sell your valuable information to anyone. Complete warranty
information is available online at www.petsafe.net.
Snap-on
Closing Panel
Interior Frame
with 2 flaps
Plastic Core Covers
Cutting Template
Installation Guide
Exterior Frame
with Flap
Hex Nuts
- Small 4 pcs.
- Medium 6 pcs.
- Large 10 pcs .
Nylon Screws
- Small 4 pcs.
- Medium 6 pcs.
- Large 10 pcs.
Core Cover
Supports
Foam Strip
Weather Strips
Kit Includes
• Hammer
• Jigsaw
• Drill
• ½” Drill Bit
• Wire Cutters
• Slotted & Phillips
Screwdrivers
• Tape Measure
• Tape
• Pencil
• Level
• Scissors
• Safety Equipment
Optional
• Duct Tape
• Caulk
Tools Needed
NOTE: The Extreme Weather Pet Door ™ can be installed in most doors and walls.
Installation in thinner or thicker applications may not require the Plastic Core Covers.
If installing in a wall, reduce cut-out width by 1” for the Small and Medium. For the
Large reduce cut-out width by 1” and cut-out height by 1”. Additional tools and
materials, such as wood framing, may be required.
Want Professional Installation Help?
Invisible Fence ® Brand installers (where available) may come to your home and install your new PetSafe ®
Pet Door for an additional cost. Contact the Customer Care Center at 1-877-866-DOGS (3647) or visit
the website at www.invisiblefence.com for more information.
Key Definitions
• Outer Frame Size: Overall pet door dimensions
• Cut-Out Size: Opening cut in homeowner’s door for proper fit and pet door installation
• Replacement Flap Size: Overall flap size when removed from pet door. During extreme changes in
weather, vinyl flaps can shrink during cold months and stretch in warmer months
• Flap Opening Size: Usable flap size for pet to enter and exit through pet door
• Interior Frame: Pet door frame on the inside of home
• Exterior Frame: Pet door frame on the outside of home
• Insulated Flap: Yellow flap located behind the vinyl flap in the interior frame
• Plastic Core Covers: Plastic pieces that cover the cut-out or “core” of the homeowner’s door
• Snap-on Closing Panel: Cover that snaps onto the pet door frame to close the pet door opening