Tuner, Cd/cd-r/cd-rw and usb storage devices, Operating this unit – Pioneer DEH-22UB User Manual

Page 7: Basic operations, Storing and recalling stations, Function settings, English

Advertising
background image

Tuner

Basic Operations

Selecting a band
1 Press BAND/ESC until the desired band (F1, F2,

F3 for FM or AM) is displayed.

Manual tuning (step by step)
1 Press c or d.

Seeking
1 Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing c
or d.
While pressing and holding c or d, you can skip
stations. Seek tuning starts as soon as you re-
lease c or d.

Storing and recalling stations

You can easily store up to six stations for each
band as presets.

% When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
Stored radio station frequency can be recalled
by pressing the preset tuning button.

# You can also recall stored radio stations by
pressing a or b during the frequency display.

Function settings

1

Press M.C. to display the main menu.

2

Turn M.C. to change the menu option

and press to select FUNCTION.

3

Turn M.C. to select the function.

After selecting, perform the following proce-
dures to set the function.

BSM (best stations memory)

BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
1 Press M.C. to turn BSM on.

To cancel, press

M.C. again.

LOCAL (local seek tuning)

Local seek tuning lets you tune in only those radio sta-
tions with sufficiently strong signals for good recep-
tion.
1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

FM:

OFF

—LEVEL 1—LEVEL 2—LEVEL 3—LEVEL

4
AM:

OFF

—LEVEL 1—LEVEL 2

Larger setting number is higher level. The highest
level setting allows reception of only the strongest
stations, while lower settings let you receive pro-
gressively weaker stations.

3 Press M.C. to confirm the selection.

Note

Operation is complete even if the menu is can-
celled before being confirmed.

CD/CD-R/CD-RW and USB
storage devices

Basic Operations

Playing a CD/CD-R/CD-RW
1 Insert the disc, label side up, into the disc loading

slot.

1 If a disc has already been inserted, press SRC/

OFF to select the built-in CD player.

Ejecting a CD/CD-R/CD-RW
1 Press h.

Playing songs on a USB storage device
1 Open the USB connector cover and plug in the

USB storage device using a USB cable.

Stop playing a USB storage device
1 You may disconnect the USB storage device at

anytime.

Selecting a folder
1 Press a or b.

Selecting a track
1 Press c or d.

Fast forwarding or reversing
1 Press and hold c or d.

Operating this unit

En

7

English

Section

01

Advertising