Polaroid 45 Ultra - Manual (Page 6)

English 7
Connect the SCSI Cables
Place the scanner at the end of the SCSI chain or between the
computer and other SCSI devices as shown in the following
diagrams. Use the shortest possible cables.
Note: Turn the computer, scanner and all other SCSI devices off
before connecting or disconnecting any cables. Do not
connect the scanner to the parallel connector on your
computer. Doing so could damage the scanner or
computer.
a SCSI address switch d SCSI termination switch
b Power switch e SCSI connectors (25, 50)
c Power connector
a
b c d e
50 pins
Scanner
(termination on)
25 pins
Computer