Basic operation, Inserting or removing a media, Playing video contents – Panasonic DMP-BD80GN User Manual

Page 16: Preparation, Inserting or removing a disc, Inserting or removing an sd card, Inserting or removing a usb device

Advertising
background image

16

RQT9407

Basic operation

Instructions for operations are generally described using the remote
control in these operating instructions.
[DivX]: [BD80]

only

Preparation

Turn on the television and select the
appropriate video input on the television.

1 Press [

Í] to turn on the unit.

2 Insert the media (

left).

Play starts.
≥If play does not start, press [1] (PLAY).

≥If the media with data in different file

formats is inserted, the file selection menu is displayed. Press

[3, 4] to select the desired file format and press [OK].

≥If the menu is displayed, press [3, 4, 2, 1] to select the item

and press [OK].

≥If the screen prompting you to use the color buttons appears,

continue to operate with the color buttons on the remote control.

Inserting or removing a media

Inserting or removing a disc

1 Press [

< OPEN/CLOSE] to open the disc tray.

2 Insert or remove the disc.
≥Press [< OPEN/CLOSE] again to close the disc tray.

≥DVD-RAM: Remove discs from their cartridges before use.

≥Insert double-sided discs so the label for the side you want to play

is facing up.

Inserting or removing an SD card

Inserting a card

1 Pull to flip down the front panel.
2 Insert the SD card into the SD card slot.

≥Press on the center of the card until it clicks into place.

Removing the card

Press on the center of the card and pull it straight out.
≥When the card indicator (“SD”) on the unit’s display is flashing,

the card is being read from or written to. Do not turn off the unit or

remove the card. Such action may result in malfunction or loss of

the card’s contents.

Inserting or removing a USB device

Inserting a USB device

≥Before inserting any USB device to this unit, ensure that the data

stored therein has been backed up.

≥Check the orientation of the USB connector and insert it straight

in.

≥Some USB devices inserted into this unit may cause this unit to

stop operating. Such USB devices cannot be used on this unit.

1 Pull to flip down the front panel.
2 Insert the USB device into the USB port.

Removing the USB device

Complete all USB device-related operations and pull the USB
device straight out.
≥When the USB device indicator is flashing, the USB device is

being read from. Do not turn off the unit or remove the USB

device. Such action may result in malfunction or loss of the USB

device’s contents.

About the use of USB device

Since the physical size of USB device can vary, please consider its
width when connecting any USB device to this unit. It is possible
that some devices may accidentally activate the playback button
and cause this unit to not operate properly.
≥In such cases we recommend using a USB extension cable (not

included).

SD

CARD

Insert the card label up with the cut-off corner
on the right.

SD

CARD

Playing video contents

≥Signal from PAL discs is output as PAL. Signal from

NTSC discs is output as “NTSC” or “PAL60”. You can

select “NTSC” or “PAL60” in “NTSC Contents Output” for

NTSC discs. (

29)

≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE

DISPLAYED. Press [∫] when you have finished playback to

protect the unit’s motor, your television screen and so on.

To switch drives
Press [DRIVE SELECT] to select “BD/DVD/CD”, “SD card”
or “USB device”.
≥If a media is inserted while the unit is stopped, the drive

switches automatically depending on the inserted media.

To display menus
[BD-V] [AVCHD] [DVD-VR] [DVD-V] [DivX]
Press [TOP MENU/DIRECT NAVIGATOR].
To show Pop-up menu [BD-V]
The Pop-up menu is a special feature available with some
BD-Video discs. This menu may vary with discs. For the
operating method, refer to the instructions for the disc.
1) Press [POP-UP MENU].

2) Press [3, 4, 2, 1] to select the item and press [OK].

≥Pop-up menu also appears by pressing [OPTION] and

selecting “Pop-up Menu”.

≥Press [POP-UP MENU] to exit the screen.

≥The producers of the disc can control how discs are

played. So you may not always be able to control play as

described in these operating instructions. Read the disc’s

instructions carefully.

≥When playing a set of two or more BD-Video discs, the

menu screen may continue to display even if the disc has

been ejected.

≥It may take time to read BD-Video discs that include

BD-J (

42).

AV1

VOL

RE-MASTER

SKIP

SLOW/SEARCH

STATUS

FUNCTIONS

R

G

Y

B

RETURN

OPTION

AUDIO

POP-

UP MENU

PLAY

PAUSE

STOP

CANCEL

PIP SECONDARY

AUDIO

SETUP

DIR

EC

T N

AV

IGA

TO

R

OK

RECEIVER

CH

VOL

AV

OPEN/CLOSE

T

OP

M

EN

U

DIS

PL

AY

e.g.,

NOTE

TIPS

RQT9407~Body_mst.fm 16 ページ 2009年2月23日 月曜日 午後8時9分

Advertising
This manual is related to the following products: