PYLE Audio PSWLE81 - Manual (Page 3)

-3-
Wood stud
Part 1a-Wood Stud Mounting
.
Use wall plate(1) as a template, make sure it is level, and mark
mounting holes on the wood studs. Drill
3/16
)
) . .
three
three (4.5mm)dia holes 50
mm deep. Level wall plate(1) and attach to wall with three long bolts(G and
three washers(F . Tighten screws firmly Do not overtighten
”
Part 1a-Wood Stud Mounting
Stud finder
50mm
Φ3/16 (4.5mm) ”
-6-
.
Part 3-Attaching brackets to screen
Center brackets vertically on back of screen. Select the
Attach brackets to screen using four selected
screws and four square washers(E) at the top and bottom of each bracket.
small(A),medium
(B or C) or large(D) screws.
Tighten screws firmly. Do not overtighten
Part 3-Attaching brackets to screen
A-D
E
Square washer(E)
Small hole for
M4 screws
Medium hole for
M5 and M6 screws
Large hole for
M8 screws
Magnetic removable
bubble level
G
F