Setting the speaker setting 69, Setting the speaker setting, Digitalsignalprocessor – Pioneer Super Tuner III D AVH-P6650DVD User Manual

Page 69

Advertising
background image

3 Touch MUSIC and then touch

MUSIC ADJUST.

# You can operate MUSIC ADJUST only when
MUSIC has been selected.

4 Touch

or

to select PANORAMA

(panorama).

Each time you touch

or

selects the item

in the following order:

PANORAMA (panorama)DIMENSION (di-

mension)CENTER WIDTH (center width)

5 Touch

to turn the panorama control

on.

# To turn the panorama control off, touch

.

6 Touch

and then touch

or

to ad-

just front/surround speaker balance.

Each time you touch

or

it moves the

sound towards the front or the surrounds.

+3  3 is displayed as the front/surround

speaker balance moves from front to sur-

rounds.

7 Touch

and then touch

or

to ad-

just the center image.

Each time you touch

or

it gradually

spreads the center channel sound into the

front left and right speakers over a range 07.

3 is the default and its recommended for

most recordings. 0 places all center sound in

the center speaker. 7 places all center sound

equally in the left/right speakers.

Setting the speaker setting

You need to make with/without (or yes/no) and

size (bass reproducing capacity) selection/ad-

justments depending on the installed speak-

ers. The size needs to be set to LARGE (large)

if the speaker is capable of reproducing

sounds of about 100 Hz or below. Otherwise

select SMALL (small).

! Low frequency range is not output if the

subwoofer is set to OFF and the front and

rear speakers set to SMALL or OFF.

! It is imperative that non-installed speakers

be set to OFF.

! Set the front or rear speaker to LARGE if

the speaker is capable of reproducing bass

content, or if no subwoofer is installed.

1 Touch A.MENU and DSP and then touch

NEXT.

2 Touch SPEAKER SETTING.

3 Touch

or

to select the speaker to

be adjusted.

Each time you touch

or

selects the

speaker in the following order:

FRONT (front speakers)CENTER (center

speaker)REAR (rear speakers)

SUB WOOFER (subwoofer)PHASE (sub-

woofer setting)

# You can switch to PHASE only when the sub-
woofer has been set to ON.

4 Touch

or

to select the correct size

for the selected speaker.

Each time you touch

or

selects the size

in the following order:

OFF (off)SMALL (small)LARGE (large)

# You cannot select OFF, when FRONT (front
speakers) have been selected.
# You can select ON or OFF, when
SUB WOOFER (subwoofer) has been selected.
# You can switch REVERSE (reverse phase) or
NORMAL (normal phase), when PHASE (subwoo-
fer setting) has been selected.

DigitalSignalProcessor

En

69

Section

14

DigitalSignalProcessor

Advertising