Philips 300 - Manual (Page 15)

Handset 13
To un-register the handset
1- Go to Handset, validate
2- Scroll to Registration, validate
3- Select Un-register handset, validate
4- Choose in the list the handset to un-register, validate
5- Enter the RC code (4 digit-code) and validate
Note : If you can, un-register a defective handset before returning the product
to the repair centre.
Renaming the handset
To rename a handset
1- Go to Handset, validate
2- Scroll to Rename handset, validate
3- Change the name and validate.
Changing the language
To change the language
1- Go to Handset, validate
2- Scroll to Language, validate
3- Select the language and validate
Note:This feature is country dependent.You may not be able to change the
language.
Warning : Changing the language will not change the voice prompts of the answer
machine.
Using the Onis 300 handset with several base stations (Philips or
non-Philips)
Each Onis 300 handset can be used with up to 4 base stations. To use a handset with another base
station, the handset must first be registered to that base station (see page 12).
When you want to call through that base station
1- Go to Handset, validate
2- Scroll to Registration, validate
3- Select Base selection, validate
4- Choose the base from the list and validate.
Warning :The handset will automatically operate with the last base station to which
it was registered.
If the handset is out of range,it will automatically search for another base station
from the list.
Onis 300 manual_Retail_UK_Indice2.qxd 07/01/03 14:09 Page 13