Panasonic CT 34WX50 - Manual (Page 26)

25
ASPECT Controls
Mode
Panasonic
AUTO
NORMAL
ZOOM
FULL
JUST
Explanation
NORMAL will display a 4:3 picture at its standard 4:3
size.
ZOOM mode magnifies the central section of the picture.
FULL will display the picture at its maximum size but
with sight elongation.
JUST mode will display a 4:3 picture at maximum size
but with aspect correction applied to the center of the
screen so that elongation is only apparent at the left
and right edges of the screen. The size of the picture
will depend on the original signal.
Notes:
(1) The S-VIDEO terminal on this set can detect specially encoded signals that are compatible with a wide screen monitor.
When a full image from the S-VIDEO terminal of specially encoded video is detected by the set, the screen size is
automatically set to FULL mode.
(2) The screen size also changes if ID-1 is detected.
(3) The screen size will also change if S1 detection has been set.
The display will automatically become enlarged
(depending on the picture source), allowing you to view
the picture at its maximum size.
Note:
(1) If Panasonic Auto mode is selected, the image may
change size suddenly, according to program
material.
(2) There may be a slight delay for the screen size to
adjust. If a 480p or 1080i signal is input during
component input signal mode, the controls will not
operate.
NORMAL
3
4
ZOOM
4
3
16
9
FULL
4
3
16
9
JUST
4
3 9
16
Panasonic AUTO
For an elongated image
For a 4:3 image
Image is expanded
4 16
3 9
4
3
Changes in accordance
w i t h t h e P a n a s o n i c
A U TO m o d e s e t t i n g
(Refer to page 24)
Picture