Panasonic AK-HBU931P - Manual (Page 7)

7
E RET B switch [RET B]
This is used to select the RET B switch. When it is
lighted, the video signals of RET B selected by the
camera are output to the viewfinder.
F User switch [USER SEL]
This enables control to be exercised over the ON/OFF
status of the items selected on the camera’s menus.
G VF DETAIL switch [VF DETAIL]
This is used to vary the amount of detail to be provided
for the viewfinder’s video output.
H MONITOR output selector switch [MONI SEL]
This is used to select the viewfinder’s video output from
the Y/C, R, G or B camera video signals.
I LENS EXT display [EXT]
This lights when the lens extender of the large lens is
ON.
J P in P function ON/OFF switch
This is used to set the picture-in-picture function on the
viewfinder screen to ON or OFF.
K P in P position selector switch
This is used to select the picture-in-picture display
position on the viewfinder screen.
L Lens shrinker display [x0.8]
This lights when the shrinker of the large lens is ON.
Controls and their functions
; 4:3 MARKER switch
This is the 4:3 marker ON/OFF switch. When the 4:3
marker is ON, the brightness modulation can be set to
ON or OFF.
< 4:3 brightness modulation level control
This is used to vary the brightness modulation level
outside the 4:3 marker.
= ND filter selector switch [ND]
This is used to select the ND filter position. It is effective
when the LOCAL switch is held down.
> ND filter indicators [1 to 5]
These indicate the positions of the ND filter.
? LOCAL switch [LOCAL]
This is used to enable the ND or CC filter to be selected
at the camera.
@ CC filter selector switch [ND]
This is used to select the CC filter position. It is effective
when the LOCAL switch is held down.
A CC filter indicators [A to E]
These indicate the positions of the CC filter.
B Menu ON/OFF switch
This is used to set the menu to ON or OFF and display
the status.
C Menu JOG switch
This is used to change the menu page and select the
data. For details, refer to the operating instructions of the
multi-format camera (AK-HC931P).
D RET A switch [RET A]
This is used to select the RET A switch. When it is
lighted, the video signals of RET A selected by the
camera are output to the viewfinder.