ProSpot Fitness P-50 - Manual (Page 11)

-- 11 --
Maintenance of the ProSpot Fitness ® P-50
Our products are made of durable materials and have been factory tested to assure proper
function and reliability. Along with our Equipment Warranty, this gives the owner of our product
the confidence of a long lasting relationship with ProSpot Fitness®
Inc. Our systems are designed
in a way to allow easy replacement of parts both mechanical and electrical if the need should ever
arise. If you are a new owner of a ProSpot Fitness®
system, three important things need to be done
to assure prompt service under the warranty:
1. Fill out and fax or mail to us your Product Warranty Registration Card along with a
copy of your sales receipt (proof of purchase) if your dealer has not done this at time of
purchase.
2. Your system needs to be set up properly according to the assembly manual.
3. Follow user instructions on how to properly use the system.
Maintenance Program
Note:
Our products are recommended for climate-controlled environments. Outdoor use is not
recommended and will void the warranty. Carefully inspect machine before each use to
determine that it is free from defects.
Do NOT use machine if you find:
1. A loose, broken or frayed cable – (needs to be replaced)
2. A loose, broken or frayed power cord – (needs to be replaced)
3. Any broken, cracked, torn, frayed or defective part of the machine – (needs to be
replaced)
4. Loose bolts or fasteners. Check all fasteners to make sure none have loosened with use.
Tighten any loose fasteners.
5. Pulleys sticking or Cables binding. Check for free movement of all cable and pulleys.
Adjust or replace if necessary.
Lubrication:
Lubricate the Internal locking Blocks periodically by spraying a standard silicone lubricant into the top
of the # 8 & 9 Locking Upright Posts in the inside corners of the tube. Do not over lubricate.
Warning: Never perform any maintenance on the unit while the power supply is
plugged into the wall.