Playing discs, Getting started/playback – Panasonic DVD-LS92 User Manual

Page 7

Advertising
background image

RQTC0175

7

ON

VOL

OPEN

Playing discs

Headphone terminals [W]

ø 3.5 mm (1/8") stereo mini jack

SETUP

Insert a disc and close the lid.

● Load double-sided discs so the label for

the side you want to play is facing up.

● Some discs start to play automatically

when the unit is on.

Click into

place

Press.

The unit turns on and play begins.

Adjust the volume.

When using headphones,

turn down the volume before

connection.

Open the lid.

● To change the language on the display 12, “Language” tab

● While stopped, the unit automatically turns off once about 15 minutes (about 5 minutes when using the battery pack) have

elapsed.

● Total title number may not be displayed properly on +R/+RW.

● If you are experiencing problems, refer to troubleshooting guide (→ 15).

● During playback of DTS source, there will be no sound from the speakers. Select a different audio source (e.g. Dolby Digital).

DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [g –OFF] when you finish to preserve the unit’s

motor.

Getting started/Playback

Note

RQTC0175-P.indd 7

1/6/2011 09:04:36

Advertising