PYLE Audio PDWM 2500 - Manual (Page 3)

2
1. Unscrew the battery cover at the end of microphone, put a 9V battery into compartment with
correct polarities, then close the cover.
2. Move "ON/OFF" switch to "ON" position, "PWR" indic ator comes on b lue. If it does n't
come on, please check the voltage of battery or polarities.
3.
If the "LOW" indicator comes on,
this indicates the battery is dead. Please replace with a fresh battery.
The "MUTE" switch cuts off audio output without powering off the microphone. Move the switch
down to engage the mute feature, and up to turn it off.