Precision Power MaxxBass - Manual (Page 15)

When the Remote INTENSITY control is plugged into the
MaxxBass ® Processor, the Remote INTENSITY control become
active and the INTENSITY control on the MaxxBass ® Processor is
disabled. This allows the user to install a remote control in a location
different than the
MaxxBass ® Processor and place in a more
convenient position for the listener such as underneath the
dashboard or in the glove compartment.
The INTENSITY control on the MaxxBass ® Processor system is
only active when the Remote INTENSITY control is not plugged in.
This control is provided for users, who do not wish to use the
Remote INTENSITY control.
TROUBLESHOOTING
NO SOUND
Is the POWER LED lit?
YES NO
Check Input cables for signal by Check power and remote
Connecting them straight to the turn-on wire for voltage.
Subwoofer amplifier. Make sure the ground wire is
Secure.
ANY SOUND NOW?
YES NO
Problem is in the Crossover. Problem is elsewhere in the
See your local Authorized system. Check head Unit and
PrecisionPower TM Dealer. amplifiers.
14