Panasonic KX-P7110 - Manual (Page 4)

Mac
4
5
Click on the Add new port or connect to
shared printer check button, then click
.
6
Click LPR Port from Directly print to KX-P7110
list. Then click .
Note:
• If the LPR Port does not appear, install the Microsoft
TCP/IP Printing service in Network properties (see
“Step 3: Installing the LPR Port on the Computer
(Windows NT 4.0 only)” on page 3.
7
Enter the IP address or host name of the printer
in the Name or address of server providing lpd
box. Enter “
lp ” in the Name of printer or print
queue on that server box. Then click .
8
Follow the instructions on the screen.
Web Administrative Tool enables the ability to manage
the device connected to the network. For the
installation and usage, see the Readme as follows:
1
Insert the printer CD-ROM in your CD-ROM
drive.
2
Exit the setup window.
3
Double click the Readme.txt
[D (CD-ROM drive name): \Network\
Webtool\English\Readme.txt]
4
See the installation instructions.
(To install the Web Administrative Tool, Web
server is needed. Refer to the help menu of
Windows to install the Web server.)
Note :
• For the IP address of the SMTP server, consult with
your network administrator.
To print a document from a Macintosh computer, the
optional
Upgrade Kit (for PostScript) must be
installed in the printer (see “Upgrade Options” of the
“Maintenance and Specifications” in the Operating
Instructions).
■ Step 1: Installing the PPD File and
Manual
1
Insert the printer CD-ROM into the CD-ROM
drive.
2
Double click the CD-ROM icon, then double
click the
English folder.
3
Double click the PPD Installer icon.
4
Follow the instructions on the screen to
complete the installation.
■ Step 2: Connecting Your Computer to
the Printer
1
Press PRINT/RESET button on the printer
panel less than 5 seconds to print the
configuration page and confirm the printer
name of AppleTalk.
2
Click the Chooser from Apple menu and
ensure AppleTalk is Active .
Note:
• If necessary, you may need to add the AppleTalk
zone where your printer is located.
3
Click the LaserWriter 8 printer icon.
4
Select the printer name from the scroll list.
5
Click or .
The following steps may differ depending on the
version of operating system, follow the instructions on
the screen.
6
Select Panasonic KX-P7110 and click
.
7
Click the option installed in your printer and
select
Installed or total installed memory.
8
Click .
9
Confirm an icon appeared to the left of the
printer name selected at step 4.
10
Close the Chooser .
To read the manual, Acrobat Reader must be installed
in your computer. To install the Acrobat Reader, refer
to the Setup Guide in the Upgrade Kit (for PostScript)
option.
Printed in China PJQQB0010ZA S0901B0
Installing the Web Administrative
Tool
Setup for Network Print (For Mac)
Next
Next
OK
Create Setup
Select
OK
M