Panduit LS8 User Manual
Page 10
LOADING BATTERIES AND LABEL CASSETTE
10
Loading the Batteries
1. Remove the battery door from the back of the P
AN
T
HER
LS8 printer. If
the impact bumper is installed on the printer, you will have to move it
away from the battery door first.
2. Install the 6 AA batteries according to the molded indicators within the
battery compartment.
3. Reattach the battery door. Move the impact bumper back over the battery
door if necessary.
Loading a Label Cassette
1. Remove the cassette door from the back of the P
AN
T
HER
LS8 printer.
2. Remove the plastic sleeve from the cassette. Retain the sleeve for later
use.
3. Install a label cassette. Press firmly to lock the cassette in place.
4. Lock the drive roller.
5. Reattach the cassette door.
NOTE: To uninstall a label cassette:
1. Unlock the drive roller.
2. Remove the cassette door.
3. Remove the cassette. Use the removal tab for
assistance.
4. Re-apply the plastic sleeve to the cassette.
5. Reattach the cassette door.