Peavey DTH 4215 - Manual

S P E C I F I C A T I O N S
DTH ® 4215
Minimum-Profile
Loudspeaker
SPECIFICATIONS
Frequency Response, 1 Meter
On-Axis, Swept-Sine in Anechoic
Environment:
50 Hz to 18 kHz
Low Frequency Cut-Off (-3 dB point):
50 Hz
Usable Low Frequency Limit
(-10 dB point):
36 Hz
Power Handling:
Full Range:
600 W continuous (49 V RMS)
1,200 W program
2,400 W peak
Biamp Low:
600 W continuous (49 V RMS)
1,200 W program
2,400 W peak
Biamp High:
80 W continuous (25.3 V RMS)
160 W program
320 W peak
Sound Pressure Level, 2.0 V (1 watt)
1 Meter in Anechoic Environment:
98 dB
Maximum Sound Pressure Level:
124 dB
Radiation Angle Measured at -6 dB
Point of Polar Response:
500 Hz to 1.6 kHz:
Horizontal 91
° ±
14
°
Vertical 100
° ±
24
°
1.6 kHz to 5 kHz:
Horizontal 86
° ±
14
°
Vertical 63
° ±
32
°
5 kHz to 16 kHz:
Horizontal 56
° ±
19
°
Vertical 38
° ±
7
°
Directivity Factor, Q (Mean):
8.9 ± 5
Directivity Index, Di (Mean):
9.5
±
2
Transducer Complement:
Two 1505-8 DT Black Widow ® woofers
One 44XT ™ compression driver coupled to
a CH ™ 7 constant-directivity horn
Box Tuning Frequency:
48 kHz
Crossover Frequency:
2 kHz
Time Offset:
0.69 mS (delay lows)
Impedance (Z):
4 ohms nominal
3.8 ohms minimum
Input Connections:
Two Neutrik ® four-conductor Speakon ®
connectors (NL4MD-V-1)
Enclosure Materials and Finish:
3/4" plywood with polyurethane coating
and powder coated metal grille with
black foam overlay