Pioneer PDP-5000EX - Manual (Page 11)

11
En
Safety Precautions 02
English
CAUTION
• Handles should not be removed or reattached by anyone
other than the professional installation technician or service
personnel.
• If handles must be removed due to specific installation
conditions, the mounting screws should be stored carefully
together with the handles. To ensure safety, the mounting
screws should be tightened to a minimum torque of 2N·m
(20 kgf·cm) when reattaching the handles.
• When moving the display, it should always be carried by two
persons holding the rear handles in the manner shown.
NO!
• Never attempt to move the Plasma Display by holding only
one of the handles.
• When installing the Plasma Display, do not use the handles
as means of hanging the display; also do not use them as
devices to prevent tipping over (see illustration).
Air vents (fan)
Center line
Main unit
a hole
Bolt
12 mm to 18 mm
Attaching surface
Center line
a hole a hole
Rear view diagram Side view diagram
Installation
bracket, etc.