Planet Technology WGS3-2620 - Manual (Page 150)

WGS3 Layer 3 Switch User’s Manual - 142 -
5.5 System Information Menu
Use the System Information Menu to display a basic description of the switch, including contact
information, and hardware/firmware versions.
Menu Description
System Information Provides basic system description, including contact information.
Switch Information Shows hardware/firmware version numbers, power status, and expansion
modules used in the stack.
5.5.1 Displaying System Information
Use the System Information screen to display descriptive information about the switch, or for quick
system identification as shown in the following figure and table.
Parameter Description
System Description System hardware description.
System Name*. Name assigned to the switch system
Object ID MIB II object identifier for switch’ s network management subsystem.
Location* Specifies the area or location where the system resides.
Contact* Contact person for the system.
System Up Time Length of time the current management agent has been running.
* Maximum string length is 99, but the screen only displays 45 characters. You can use the arrow keys to
browse the whole string.