Product information, Safety instructions – Planar VSS17SX User Manual
Page 6
17" VitalScreen S
vi
QUICK LINKS
GETTING STARTED
INSTALLING THE DISPLAY
USING THE CONTROLS
APPENDIXES
Product Information
Safety instructions
Store the display in its original shipping carton when it is not in operation for extended
periods of time. Use the original packing materials and carton when shipping the display.
•
Do not place the display near a window. Exposing the display to rain, water,
moisture, or direct sunlight can damage it.
•
Do not place anything on top of the video cable. Place the cable clear of foot traffic.
•
Do not apply excessive pressure to the screen. Excessive pressure may cause permanent
damage to the display.
•
Refer all servicing to qualified personnel to maintain your warranty. The display and
power adapter units contain no user-serviceable parts.
•
Do not cover or obstruct the venting holes on the back of the display.
•
Make sure the display storage area has a temperature range between -20° and 65° Celsius.
Storing your display outside this range could result in permanent damage.
•
Do not expose the display to liquid or drop it. If the case has been damaged, the unit
may pose a shock or fire hazard. Unplug the unit immediately and call customer support
for assistance.
•
Replace any cord or cable that is frayed or damaged with another of the same type and
rating as supplied by Planar. The safety and regulatory listings and certifications are based
on the cable supplied by Planar.
•
Use only the power adapter that has been tested and approved for use with this display
product. The power adapter must be plugged into a grounded power outlet.
•
Do not use the power adapter near inflammable anesthetics.
•
Disconnect the display from the mains by pulling the mains power cord/mains plug.
•
Install the display near a wall outlet that is easily accessible.