Peavey COBRANET AUDIO BRIDGE CAB 16D - Manual (Page 6)

CAB ™ 16 Series User Manual
Page 6 http://aa.peavey.com copyright 2000 All Rights Reserved
CAUTION!
The CAB 16 Series products are Ethernet (CobraNet ™ ) network products designed to operate on a network back-
bone or infrastructure. The design, implementation and maintenance of this infrastructure is critical to the opera-
tion and performance of the CAB 16 Series products. Peavey Electronics does not support nor service network cabling, hubs,
switches, patch bays, wall plates, connector panels or any other type of network interconnect device. Please ensure that these
components and their associated installation techniques have been properly designed and installed for CobraNet audio appli-
cations.
This manual is written specifically for the CAB 16 Series products built with Firmware Version 2.6.8. Specific functionality
relating to earlier firmware is not covered in this manual. In the event that your CAB 16 includes an earlier firmware release,
you should contact the Peavey Architectural Acoustics Technical Services Group for information on how this may, or may not,
impact your installation. Installation or upgrading firmware within the CAB 16 is not covered in this manual.
Several associated products are required to complete a working system using the CAB 16. This manual frequently makes refer-
ence to these other products, but does not provide specific configuration or installation information on them. Please refer to
the manuals for these products for information. Every product, both Peavey products and third party devices, must be proper-
ly installed for the CAB 16 to operate in accordance with its published specification.
This product is fan cooled with an intake fan on one side of the unit. The exhaust is located on the other side. Do not block
the fan or any vents when installing this product. Proper cooling is essential to maintain proper operation and long-term sta-
bility in this product. Install this product in EIA approved equipment racks only.
The information contained in this manual is subject to change without notice. Peavey Electronics is not liable for improper
installation or configuration. The information contained herein is intended only as an aid to qualified personnel in the design,
installation and maintenance of engineered audio systems. The installing contractor or end user is ultimately responsible for
the successful implementation of these systems.