Panasonic CR-W400U - Manual (Page 17)

16
Troubleshooting
(continued)
❏ Troubleshooting Tips
PROBLEM
Unit does not turn on.
Radio has static.
Radio memory buttons do not
work.
Inverted sound (Left/Right conn-
ections.)
No sound from front or rear
speakers
POSSIBLE CAUSE
Dead vehicle battery
Ignition or Acc is not on.
Bad power line connection
Antenna not hooked up
Close to high power lines
Not holding buttons down long
enough
The speaker cords are inverted.
The fader control is set on the
wrong position.
PROBABLE SOLUTION
Charge vehicle battery.
Turn ignition to On or Acc.
Check connections.
Hook up antenna.
Move away from high power lines.
Press and hold buttons for more
than 2 seconds.
Check the speaker cords.
Adjust the fader control of the
unit correctly.