Profoto Pro-7b - Manual (Page 10)

10
Batter y
– Heads
Lamp heads for the Pro-B2 and the Pro-7b
If you choose one of our most powerful battery generators you can use all the lamp heads that
fits the state-of-the-art Pro-7 series - plus the light-weight Pro-B Head.
ProHead Fan Cooled Head
90 07 09 with 250 W Halogen lamp
In the studio, the standard heavy-duty tool is the Profoto
ProHead, built for producing flashes up to 4800 Ws, over
and over again, hour after hour. The fan works when the
head is used on the Pro-B2.
The ProHead includes: Zoom Reflector, quartz flash tube, 250 W halogen
lamp, removable frosted glass cover, protective transportation cap,
stand adapter and a 4 m (13 ft) lamp cable.
ProRing 2 30 05 17
ProRing 30 05 15
For fashion or other occasions when you want a direct and
very prominent light, there is the Profoto ProRing 2, a ring
flash capable of as many 2400 Ws flashes per minute as
the generator can produce, and also including a powerful
200 W modeling light.
If you look for a more light-weight ring flash without
modeling light, there’s also the Profoto ProRing, with the
capacity of up to eight 2400 Ws flashes per minute.
The ProRing 2 includes: circular quartz flash tube, 10 x 20 W halogen
modeling lamps, camera adapter, stand adapter and a 4 m (13 ft)
special lamp cable.
The ProRing includes: circular flash tube, camera adapter, stand
adapter, and a 4 m (13 ft) special lamp cable.
ProRing and ProRing 2 accessories: Close-up Reflector, Softlight
Reflector, Widesoft Reflector and ProRing Diffuser.
ProTwin
90 07 19
For even tougher demands, there is the Profoto ProTwin,
that, using two flash tubes, effectively doubles the
performance of the ProHead. When used with a single
generator, it produces shorter flash duration. Used with
two generators, it achieves faster recycling and/or higher
power, up to 4800 Ws.
The ProTwin includes: Magnum Reflector, two uncoated flash tubes,
500 W halogen modeling lamp, removable frosted glass cover, protec-
tive transportation cap, stand adapter and a special 4.5 m (14,5 ft)
long Twin Lamp cable.
Pro-B Head
90 07 25
For the Pro-B2 and the Pro-7b there is the handy Profoto
Pro-B Head, that gives you 1200 Ws flashes and a 100 W
modeling light while still weighing only 1.8 kg.
The Pro-B includes: Disc Reflector, flash tube, 100 W halogen lamp,
removable frosted glass cover, protective transportation cap, stand
adapter, and a 4 m (13 ft) lamp cable.
Photo:
©
M
a
tthew Jordan Smith/Barbar
a with F
ord Models. Modular light shaping tool: StickLight.