Philips FW P88 - Manual (Page 28)

28
English
3139 116 19721
TIMER SLEEP TIMER
5 Press CLOCK/TIMER to store the start
time.
™ The timer is now set.
™ The
TIMER remains on the display.
• At the preset time, the timer will be
activated.
™ The selected source will be played.
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the last
tuned frequency will be switched on.
– If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the CD trays
are empty, TUNER will be selected
instead.
– If the source selected is TAPE, and if the
preset time is reached during high
speed dubbing, the TUNER will be
selected instead.
– The timer will not activate if a recording
is in progress.
Sleep (only on remote control)
This feature allows you to select a length
of time after which the system will switch
to the standby mode automatically.
1 Press SLEEP on the remote control
repeatedly to select a period of time.
™ The selections are as follows (time in
minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF
™ 60 …
™ "SLEEP XX" or "OFF" will be
displayed. " XX" is the time in
minutes.
2 When you reach the desired length of
time, stop pressing the SLEEP button.
™ After this amount of time passes, the
system will switch to the standby
mode.
To switch off the Sleep Timer
• Press SLEEP repeatedly until "
OFF" is
displayed, or press the STANDBY ON
button.
To switch off the TIMER
• Press TIMER ON/OFF on the remote
control.
™ The timer is now switched off.
™ The display will show "CANCEL"
and the TIMER disappears.
To start the TIMER again (for the same
preset time and source)
• Press TIMER ON/OFF on the remote
control.
™ The timer is now on.
™ The
TIMER appears on the display.
pg 01-31/P88/22-Eng 3/6/00, 1:28 PM 28