User data – Panasonic BT-LH80WP User Manual

Page 15

Advertising
background image

MENU

EXIT

SEL.

ENTER

ENTER

[SYSTEM CONFIG]

CONT./BACK.
BACKLIGHT
PEAKING/PHASE
STATUS DISPLAY
BATTERY REMAIN
SETUP LOAD

SETUP SAVE

PWR ON SETUP

BACKLIGHT

--

PEAKING

3SEC OFF

OFF

FACTORY

USER1

LAST

MENU

EXIT

SEL.

ENTER

SET

[SETUP SAVE]

USER1

YES
NO

MENU

EXIT

SEL.

ENTER

ENTER

[SYSTEM CONFIG]

CONT./BACK.
BACKLIGHT
PEAKING/PHASE
STATUS DISPLAY
BATTERY REMAIN

SETUP LOAD

SETUP SAVE
PWR ON SETUP

BACKLIGHT

--

PEAKING

3SEC OFF

OFF

FACTORY

USER1

LAST

MENU

EXIT

SEL.

ENTER

SET

[SETUP LOAD]

USER1

YES
NO

15

Changes to green

Changes to green

User Data

You can change the menu setting values and picture adjusting knob settings, then save and load up to 5 combinations
of screen adjustment values as user data. You can also return the setting values and adjustment values to the
factory preset settings.
The following settings are included in user data.
• Menu settings except for “SETUP LOAD/SAVE” and “REMOTE of CONTROL” (including the button function

settings on the front of the monitor)

• Screen adjustment values changed in picture adjusting knob

Saving user data

Loading user data

4. Push [

,

] to select the file you wish to save to

from “USER1” – “USER5”, then push [ENTER].

The following screen appears.

1. Push [MENU] to display the MAIN menu.
2. Push [

,

] to select the “SYSTEM CONFIG”

menu and push [ENTER].

3. Push [

,

] to select the “SETUP SAVE” sub

menu and push [ENTER].

The setting values in the sub menu change to

green.

5. Select “YES”, and push [ENTER].
The user data is saved.

1. Push [MENU] to display the MAIN menu.
2. Push [

,

] to select the “SYSTEM CONFIG”

menu and push [ENTER].

3. Push [

,

] to select the “SETUP LOAD” sub

menu and push [ENTER].

The setting values in the sub menu change to

green.

4. Push [

,

] to select the file you wish to load to

from “USER1” – “USER5”, then push [ENTER].

The following screen appears.
To return to the factory preset setting values, select

“FACTORY”.

5. Select “YES”, and push [ENTER].
The user data is loaded.

To return to the previous screen
Push [MENU].

Advertising