Pioneer Premier Flash Memory Multimedia AV Navigation Receiver AVIC-F90BT - Manual (Page 142)

5 Touch [+] or [ –] next to “Frequency” to
select cut-off frequency.
Each time you touch [
+] or [
–], cut-off frequen-
cies are selected in the following order:
50 Hz
— 63 Hz — 80 Hz — 100 Hz — 125 Hz
Only frequencies lower than those in the se-
lected range are output from the subwoofer.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, activate
HPF
(high pass filter). Only frequencies higher than
those in the selected range are output from
the front or rear speakers.
1 Touch [HPF] on the “AV Sound” menu.
= For details, refer to Displaying the “AV
Sound
” menu on page 139.
2 Touch [HPF] to select cut-off frequency.
Each time you touch [ HPF] selects cut-off fre-
quencies in the following order:
Off
— 50 Hz — 63 Hz — 80 Hz — 100 Hz —
125 Hz
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Touch [SLA] on the
“AV Sound” menu.
= For details, refer to Displaying the “AV
Sound
” menu on page 139.
3 Touch [+] or [
–] to adjust the source vo-
lume.
+4 to
–4 is displayed as the source volume is
increased or decreased.
Following AV sources are set to the same
source level adjustment volume automatically.
! CD, ROM, DivX (for AVIC-F900BT and AVIC-
F90BT)
! CD, ROM (for AVIC-F700BT and AVIC-
F7010BT)
! XM and SIRIUS
! AV1 and AV2
! EXT1 and EXT2
p The different source volume level can be set
between iPod and USB.
p For AVIC-F900BT and AVIC-F90BT, the
source volume level can be set to DVD-V
and DVD-VR respectively as well as differ-
ently from the other sources of the built-in
DVD drive previously mentioned.
Enhancing bass (Bass Booster)
The
“Bass Booster” enhances bass sounds,
which can be muted by driving noise.
1 Touch [Bass Booster] on the
“AV
Sound ” menu.
= For details, refer to Displaying the “AV
Sound
” menu on page 139.
2 Touch [+] or [-] to adjust the range from
0 to 6.
The options on the
“AV
Settings
” menu
Displaying the
“AV Settings” menu
1 Press MENU button to display the
“Top
Menu
”, and then touch [Settings].
2 Touch [AV Settings].
The
“AV Settings” menu appears.
Customizing preferences
En
142
Chapter
25