Panasonic CQ-2130U - Manual (Page 7)

CQ-2130U
7
CLK
ALM
PRG
LOUD
APM
BAND PWR
VOL
SEL
CQ-2130U
PUSH
BASS/TREB
BAL/FADER
MUTE
6 5 4 3 2 1
SCAN
TUNE
SEEK
ILL
CLK
TUNE
SEEK
Clock Setting
The 12-hour system is used for the clock.
Initial Time
“SET” is displayed when the clock is not adjusted.
Selecting the Clock Display
Press [CLK] (clock) to switch clock and alarm time
display both.
Note: if no operation takes place for more than 5 sec-
onds in alarm time, the display returns to the
clock display.
[}] (Minutes) [{] (Hours)
Time Setting
Time Reset
When you want to reset the time, repeat steps q to
r.
Note: the current time will be displayed at all the
time even the power of the radio is turned off.
q Press and hold [CLK] (clock) and do not release
to set time. Display blinks and the time setting
mode is activated.
w Press [{] to set the hour.
e Press [}] to set the minute.
r Once the time has been set, release [CLK].
Note: Press and hold [{] or [}] to change num-
bers rapidly.
(blink.)
(Hours set.)
(Minutes set.)
(End.)
clock display Alarm time display
Hours
Minutes