Polaris Sprotsman 700 - Manual (Page 46)

44
CONTROLS AND FEATURES
Controls
Engine Electrical Switches
1. Override Switch (Reverse Speed
Limiter) - This vehicle is equipped
with a reverse speed limiter
system. To obtain additional power
while backing up, depress the
override button. NOTE: The
override switch also allows
activation of AWD (All Wheel
Drive) in reverse, if the AWD switch is on. When not in reverse the
switch also acts as the “mode button” for the instrument cluster.
2. Main Switch - To start the engine, slide the stop switch to the
center “run” position and turn the main key switch clockwise past
the “on” position. Release the key when the engine starts.
3. Engine Stop Switch - The engine will not start or run when the
switch is in its “off” position. Its purpose is to provide the
operator with a quick means of engine shutdown in case of stuck
throttle or other emergency. NOTE: Both the main switch and the
emergency engine stop switch shut off all electrical power to the
entire vehicle including lights. To stop the engine, slide the stop
switch right or left to the “off” position.
1
2
3
WARNING
Activating the override button while throttle is open can cause loss
of control resulting in severe injury or death.
RUN OFF OFF
3