Peg-Perego FINA0601I60 - Manual (Page 8)

• IMPORTANT: read the instructions
carefully before using the stroller. Save the
instructions for future reference.
• PEG PEREGO reserves the right to make any
necessary changes or improvements to the
products shown at any time without notice.
CUSTOMER SERVICE
If parts of the model are accidentally lost or
damaged, use only original Peg Perego spare
parts. Contact the Peg Perego Customer
Service for all repair work, replacements,
information about products, and sale of
original spare parts and accessories, at the
following:
USA:
tel.: 800.671.1701
fax: 260.471.6332
Call us toll free: 1.800.671.1701
CANADA:
tel.: 905.839.3371
fax: 905.839.9542
Call us toll free: 1.800.661.5050
www.pegperego.com
INSTRUCTIONS FOR USE
ASSEMBLING THE HIGH CHAIR
1• Attach the wheels, making sure to insert
the ones with the brakes on the back part
of the high chair.
2• Attach the two front wheels, pressing in
the direction shown by the arrow.
3• When it comes out of the packaging, the
seat of the high chair is not in the correct
position for use (it is in packing position).
To use the high chair, lift the seat as in
the figure until you hear a click, placing
it at one of the seven different possible
heights. To place the seat in the position
for it to be put back in its packaging, see
directions below.
TO OPEN THE HIGH CHAIR
4• To open the high chair, push the little
red levers on the sides downwards as in
the figure, pressing down on the back
supports.
5• Lower the footrest, as shown in the
figure.
BRAKE
6• The high chair has four swivel wheels,
with brakes on two of them. To brake the
high chair, lower the little brake levers on
the rear wheels. To release the brakes, lift
the levers. For your convenience, always
make sure the brakes are set before
carrying out any other operation on the
high chair.
TRAY
7• To attach the tray, pull the lever under
it towards you while slipping the tray
onto the armrests. Push all the way in, as
shown in the figure.
8• The high chair tray can be adjusted to
three different positions. The third
position (marked with red notches)is not
meant for use with the tray; it is used for
folding up the tray.
• To extend the tray, pull the lever under
it towards you as you pull the tray out to
the first position. Repeat the operation to
set the tray in the second position.
• To remove the tray, pull the lever as you
pull the tray towards you.
9• The high chair comes with two trays. The
child can play on the lower tray and eat
on the upper one, which is easy to wash
and can be kept perfectly clean.
• To remove the meal tray, unhook it from
the lower tray by lifting as shown in the
figure.
SAFETY BELT
10• Make sure that the shoulder strap is
correctly inserted, by pressing on it, as
shown in figure A. Fasten the lap belt as
shown in figure B.
11• To unfasten the safety belt, press the
sides of the buckle (fig. A) while pulling
the lap belt outwards (fig. B).
12• The shoulder straps can be adjusted to
two different heights. Unfasten the safety
belt from behind the backrest by pushing
the buckle downwards (fig. A). Slip the
safety belt out of the sack (fig. B).
13• Next, slip the safety belt buckle through
the other opening in the backrest (fig. A),
and fasten the buckle to the peg, pulling
the safety belt until it clicks into place
(fig. B).
7 HEIGHTS
The high chair adjusts to 7 different
heights.
14• To lift the high chair, hold it under the
tray and pull upwards.
15• To lower the high chair, simultaneously
press the two side buttons, stopping at
the desired height.
These operations can be carried out with
the child in the high chair.
RECLINING HIGH CHAIR
16• The high chair reclines, and adjusts to
four different positions: for mealtime,
playtime, relaxing, or napping. To adjust
it, lift the handle behind the backrest and
set the high chair to the desired position.
This operation can be carried out with the
EN•ENGLISH