Pioneer AVIC-Z120BT - Manual (Page 2)

1
Touch the keys in the fol-
lowing order in the “ Top
Menu ” screen. Settings
System Settings
Volume
2
Touch + or – to change the
volume of the route guid-
ance.
Pairing your
phone
1
Activate the Bluetooth
function on your phone.
2
Touch the keys in the fol-
lowing order in the “ Top
Menu ” screen.
Settings Bluetooth
Settings
3
Touch Bluetooth On/Off to
select On .
4
Touch Registration on the
“ Bluetooth Settings ”
screen.
The system tries to find and
lists nearby devices.
5
Touch your phone on the
list.
6
Enter the PIN code from
your phone. (The default
code is 1111.)
When the pairing is success-
ful, the message will appear.
Transferring
the phone book
1
Connect the cellular
phone.
2
Touch Contacts Transfer
on the “ Phone Menu ”
screen.
3
Check that the following
screen is displayed, and
operate your cellular
phone to transfer the
phone book entries.
After transferring the data is
finished, a message asking
whether you want to transfer
more data appears.
4
Touch No .
The transferred data is
imported to the navigation
system.
Setting the volume of the route
guidance
Scroll the screen by dragging an AV source icon up or down,
and tap FM on the AV operation screen.
Using the radio (FM)
Playing your Apple iPod
You can control an iPod by connecting the USB interface cable for
iPod (CD-IU50V) (sold separately) to the navigation system.
Inserting and ejecting
an SD card
For details about playable files, refer to Operation Manual.
1 Displays the artist name list,
album title list or song title
list
2 Displays the category list
3 Displays the genre list
4 Selects the song to play by
scrolling and dragging the
key up or down. To play the
song, tap it
5 Switches the list screen
between music and video
6 Selects a song by scrolling
and dragging the character
tab up or down. Tap the tab
of the character for the song
title that you want to display
7 Starts playback by tapping
an item to select
1
Connect your iPod.
USB and mini-
jack connector
USB interface
cable for iPod
2
Tap or drag the key that you want to operate.
1 Displays the current preset
frequency list
2 Scans until a broadcast
strong enough for good
reception is found
The source changes and then playback will start.
2 1 2
3 4
1
6
5
2
7
Inserting an SD card
1
Press  button. The
“ Monitor Setup ” screen
appears.
2
Touch SD Insert on the
screen.
3
Insert an SD memory card
into the SD card slot.
4
Press  button.
Ejecting an SD card
1
Press  button. The
“ Monitor Setup ” screen
appears.
2
Touch Eject SD on the
screen.
3
Press the middle of the SD
memory card gently until
it clicks.
4
Pull the SD memory card
out straight.
5
Press  button.