Panasonic DMC-FX90 - Manual (Page 27)

27
(ENG) VQT3S29
• Before inserting the CD-ROM, close all running applications.
Check the environment of your PC.
• Operating environment of “PHOTOfunSTUDIO 6.4 HD Lite Edition
with Wi-Fi”
– OS:
Windows
R XP (32bit) SP2/SP3,
Windows Vista R (32bit) SP1/SP2,
Windows R 7 (32bit/64bit)
– CPU:
Pentium
R III 500 MHz or higher (Windows R XP),
800 MHz or higher (Windows Vista R ),
1 GHz or higher (Windows R 7)
– Display:
1024k768 pixels or more (1920k1080 pixels or more recommended)
– RAM:
512 MB or more (Windows
R XP/Windows Vista R ),
1 GB or more (Windows R 7 32bit),
2 GB or more (Windows R 7 64bit)
– Free hard disk space:
450 MB or more for installing software
• Refer to the operating instructions of “PHOTOfunSTUDIO 6.4 HD Lite
Edition with Wi-Fi” (PDF) for further operating environment.
Insert the CD-ROM with the supplied software.
• When you insert the supplied CD-ROM, the install menu will start.
Click on the [Applications] on the install menu.
Click on the [Recommended Installation].
• Proceed with installation according to messages appearing on the
screen.
Note
• The software compatible with your PC will be installed.
• “PHOTOfunSTUDIO 6.4 HD Lite Edition with Wi-Fi” is not compatible with Mac.
Installing supplied software
DMC-FX90P-VQT3S29_eng.book 27 ページ ２０１１年８月２２日 月曜日 午後３時５８分