Perle Systems CM-110-XXXXX - Manual (Page 8)

Perle 10/100 Media Converter Module – Installation Guide 8
Duplex (copper) (Switch 4)
Switch Position Mode
Up (default) Full
Down Half
Note: When Auto Negotiation (SW1) is set to Off, the Media
Converter will use this Duplex setting for its copper connection.
Up: The Media Converter Module will be set to Full Duplex mode.
Down: The Media Converter Module will be set to Half Duplex mode.
Speed (copper) (Switch 5)
Switch Position Mode
Up (default) 100
Down 10
Note: When Auto Negotiation (SW1) is set to Off, the Media
Converter Module will use this Speed setting for its Ethernet copper
connection.
Up: The Media Converter will be fixed at 100 Mbps.
Down: The Media Converter will be fixed at 10 Mbps.