Panasonic AJ- G - Manual (Page 30)

E-29
Menu item
(Continued)
DTL SKIN DTL
Layer Item
Variable
range
Contents description Storage
1 MDTL –31
:
+31 To set the level of the
master detail (H and V)
Yes
HDTL 0
:
63 To set the H.DTL
LEVEL
VDTL 0
:
31 To set the V.DTL LEVEL
2 CORG OFF
0
:
5 To set detailed noise
elimination level
Yes
FREQ 0
:
31 To set the H.DTL FREQ
LDP 0
:
5 To set the LEVEL
DEPEND
3 K-AP OFF
0
:
5 To set the details of the
high brightness part
Yes
+GAIN –31
:
+31 To change the level in
the + direction of the
H.DTL
–GAIN –31
:
+31 To change the level in
the – (down) direction of
the H.DTL
4 CLIP 0
:
63 To change the clip in the
+ direction of the DTL
signals
Yes
SOURCE R+G
G+B
2G+R+B
3G+R
R
G To set the signal source
of the DTL signal
components
Layer Item
Variable
range
Contents description Storage
1 S DTL OFF
A
B
AB To select the skin tone
table that enables skin
tone details
OFF: To select OFF of
the skin color
DTL
A: To put DTL in the
SKINTONE
setting set in
Table A
B: To put DTL in the
SKINTONE
setting set in
Table B
AB: To put DTL in the
SKINTONE
setting set in
Tables A and B Yes
OUTPUT MONI
VIDEO To select the output that
adds SKINZEBRA
SZEB ON
OFF To select ON/OFF for
SKIN ZEBRA against
the output selected in
OUTPUT
The ZEBRA will be
attached to the color of
the table set in
DETECT.
2 TABL A
B To select the table for
setting SKIN TONE to
be adjusted using the
unit
Yes
3 SCORG 0
:
7 To set the effects of
SKIN TONE DTL
scoring
Yes
4 YMAX 0
:
255 To set the maximum
value of the brightness
signals enabling SKIN
TONE
Yes
YMIN 0
:
255 To set the minimum
value of the brightness
signals enabling SKIN
TONE
AJ-RC10G.book 29 ページ ２００６年７月２６日 水曜日 午前９時２５分