Panasonic SA-HE100 EN - Manual (Page 10)

10
RQT6208
When you finish listening
Be sure to reduce the volume and press [ ] to switch the unit
to standby.
For your reference
In rare cases, the unit may have trouble recognizing the digital
signals on discs.
¡ With the PCM signals on CDs, this may cause the beginning of a
track to be cut off. Engage the PCM FIX mode if this occurs.
¡ With DTS, the signals may not be recognized at all. Engage the
DTS FIX mode if this occurs.
While the input source is selected and digital input is engaged:
Press and hold [ ].
The current mode is displayed. Press again to change the mode.
Each time you press the button:
AUTO
/ PCM FIX / DTS FIX
↑
When a FIX mode is on, the unit cannot process other signals. This
may cause noise to be output. Select “AUTO” if this occurs.
The selected mode is stored for each input source even if the unit is
turned off.
DIGITAL INPUT
POWER
8
Use this mode to play digital or analog stereo sources or to play
surround sources through two speakers. When surround sources
are played in this mode, the sounds intended for the other
speaker channels are played through the front speakers.
Select this mode when you are playing a digital surround source
(Dolby Digital or DTS).
Also select this mode when playing analog or digital stereo
sources. The Dolby Pro Logic
2 processor works
not only on sources recorded with Dolby
Surround, but also on any stereo source. The
following modes are available when using Dolby
Pro Logic
2 .
Enjoy an enhanced sound experience with greater presence and
spread by using these SFC (sound field control) modes with PCM
or analog stereo sources.
The SFC modes cannot be used if the input signal
is Dolby Digital or DTS.
Choose from the following modes.
DOLBY
PRO LOGIC 2
SPEAKERS
SOUND MODE
STEREO
L R
A
SPEAKERS
SOUND MODE
SFC A
Basic operations Step
1 2 3
4
Switch on.
POWER
8
Turn
SPEAKERS A on.
SPEAKERS
A
Select input.
TAPE PHONO
VCR 1/VCR 2 TUNER
TV , / DVD , / CD
INPUT SELECTOR
DIGITAL INPUT
Select the DSP
sound mode.
Start play of the
source.
Adjust the
volume.
DOWN UP
VOLUME
1
2
3
4
5
6
DSP SOUND MODE
SURROUND mode
STEREO mode
SFC modes
SPEAKERS
A
For CD, DVD, TV
Select digital or analog input.
ENHANCED SURROUND mode
SPEAKERS
SOUND MODE
SURROUND
L C R
SL SR LFE
A ENHANCED
SB
ES
SPEAKERS
DIGITAL
SOUND MODE
SURROUND
L C R
SL SR LFE
A
ENHANCED SURROUND
This mode uses the surround back speaker to create a realistic
sound field. It is especially effective when playing DTS-ES and
Dolby Digital Surround EX, but can be used with other DTS and
Dolby Digital sources.
Use DTS NEO:6 to play 5.1-channel DTS and 2-channel PCM
and analog sources through 6.1 channels.
The following modes are available when playing
2-channel PCM and analog sources.
NEO:6
SFC
,/ ,/
,/ ,/
Notes on using the Digital Signal Processor
The digital signal processor in this unit can decode the
following signals:
¡ ¡ Dolby Digital
¡ ¡ DTS, including DTS-ES
¡ ¡ PCM, including PCM with sampling frequencies of 96 or
88.2 kHz
It cannot decode:
¡ Other digital signals, such as MPEG
¡ Dolby Digital RF signals from a laser disc player
When playing PCM with sampling frequencies of 96 or 88.2 kHz,
the STEREO DSP mode is engaged automatically.