18 playing a disc – Philips DVD700AT User Manual

Page 18

Advertising
background image

18 Playing a Disc

• A “No Feature” symbol may

appear at the bottom right of the TV
screen. This symbol means either the
feature you tried is not available on
the Disc, or the DVD Player can not
access the feature at this time. This
does not indicate a problem with the
DVD Player.

• If a Disc is dirty or has scratches, the

pictures may appear distorted and
playback may stop. In such cases,
remove the Disc and turn off the
DVD Player. Disconnect the power
cord, then reconnect it. Clean the
Disc, then turn on the DVD Player
again and reinsert the Disc for play-
back.

• When the DVD or CD light appears

on the display panel, the Disc is
loaded completely and is ready for
playback.

Helpful Hints

Playing a DVD or an Audio CD

Before you begin...
Turn on the power of the TV, amplifier and any other equipment
connected to the DVD Player. Make sure the TV and the stereo
or amplifier (if applicable) are set to the correct channel. Details
are on pages 8-12.

2

Press the OPEN/CLOSE button to open the Disc tray.

1

Press the POWER button to turn on the DVD Player.
“HELLO” will appear briefly on the display panel.

3

Place a Disc into the tray. Make sure the Disc is sitting prop-
erly in the correct recess.
Some DVDs are recorded on both sides. Make sure the side you
want to play is facing up. Or, if the DVD is recorded on only one
side, place the Disc in the tray with the label facing up.

4

Press the PLAY button. The tray will close automatically, and
playback will begin at the first Chapter or Track of the Disc.
Or, you may press the OPEN/CLOSE button to close the tray,
and DVD playback will start automatically. (You also may close the
tray by gently pressing the Disc tray toward the DVD Player.)
If the DVD in the tray has a menu, the menu may appear on the
screen instead. Details are on page 19.
With some Audio CDs, playback will not begin unless you press
the PLAY button.

5

Press the STOP button to stop playback.

SETUP

MODE

DISPLAY

CLEAR

+10

3

6

9

0

2

5

8

1

4

7

SKIP

SEARCH MODE

TITLE

ENTER

POWER

MENU

STOP

PLAY

FWD

REV

RETURN

A-B

REPEAT

PAUSE/STILL

AUDIO

SUB TITLE

ANGLE

OPEN/

CLOSE

1

2

4

5

DVD

AUDIO CD

Insert a Disc.

3

Remember, this DVD Player

will play only certain Discs.

See page six for details.

Advertising
This manual is related to the following products: