Recording 05, Vcr plus+ programming with the power off, Setting a manual timer recording – Pioneer DVR-540H-S User Manual

Page 42

Advertising
background image

Recording

05

42

En

VCR Plus+ programming with the
power off

You can enter a PlusCode programming
number when the recorder is in standby.

Note that the recording is always made to
the HDD. If you want to record to a DVD disc,
you’ll need to switch on the power and use
the full VCR Plus+ program screen.

Important

• You can’t use this feature until you have

set up the guide channels. see VCR
Plus+ CH Setting
on page 111.

• You can’t change the recording mode.

• You can’t program daily or weekly timer

recordings.

1

Press ‘VCR Plus+’.

The front panel display shows the current
recording mode and prompts you to enter
the PlusCode programming number.

2

Use the number buttons to enter the

PlusCode number.

• To clear the last digit entered, press

CLEAR.

3

Press ENTER.

The display shows the timer settings:
Date

Start time

End time

HDD and

Recording channel

Recording mode.

• If

CODE ERROR appears in the display,

check that the number is correct and
that the guide channel is set (see VCR
Plus+ CH Setting
on page 111), then set
the timer recording again.

• If

CAN’T SET appears in the display, it

means that although you entered a valid
PlusCode number, the program has
already finished.

Setting a manual timer recording

The timer recording screen you can see all
the timer programs already set, clear
programs and set up new ones.

1

Press HOME MENU, select Timer

Recording, then Timer Recording.
This screen shows all the timer programs
currently set.

• Each row is for one timer recording

program, with the date and time
information, channel, recording mode,
DVD or HDD and recording status.

• The amount of free space available on

the HDD and the currently loaded
recordable DVD is shown towards the
bottom of the screen.

• In the upper-right corner, the number of

timer programs already set is shown
next to

Tmr Pgms.

• If there are more than five timer

programs already set, press

NEXT

to switch page (go back using the

PREV

button).

• You can also delete a timer program

before it’s started (before the recorder
enters timer recording standby) by
highlighting it and pressing

CLEAR. See

HDD Remain
DVD Remain

59h59m(SP)

1h59m(SP)

3/26 SUN 3:00PM

Tmr Pgms 3/32

Manhattan Open Tennis

OK

3/26 SUN 6:00PM – 7:00PM

10ch

World Journey

OK

3/27 MON 7:30PM – 9:00PM

4ch

8ch

Flower

Until 4/20

MON – FRI 1:30PM – 2:00PM

New Input

Timer Program View

05 Recording.fm 42 ページ 2006年3月7日 火曜日 午後3時51分

Advertising
This manual is related to the following products: