Polycom DOC2559A User Manual
Page 48
Chapter 2- Component Replacement
2-2
•
Fabric Switch Module (FSM 4000), see “Replacing the Fabric Switch
Before replacing parts:
•
To ensure a part needs replacing, complete the troubleshooting
procedures.
•
Identify exactly which part needs replacing.
•
Make sure you have the correct replacement part on hand.
•
Make sure you are using proper ESD equipment, to prevent damage
to the system.
Warning!
•
All maintenance tasks are to be performed by qualified, authorized personnel.
•
Use only replacement parts supplied by your dealer.
•
Follow all procedures. Do not skip any steps.
Note! On all cards, if during the startup phase the blue HS LED remains lit,
please make sure that the card is properly seated in it’s slot. If this problem
persists, contact your next level of support.