PowerFile C200 Studio - Manual (Page 50)

Instructions for Macintosh
Page 49
Option B—From the MediaFinder window
1 Select the disc you wish to unload by single-clicking on the disc name in the lower
portion of the MediaFinder window.
2 Go to the Browser menu, then to the Changer Admin submenu, and select Unload
Disc.
3 The carousel rotates to place the disc at the load/unload slot, and the disc is lifted
up and out for removal. (If the disc is not removed from the slot within approximately
10 seconds, it will be lowered back down into the carousel.)
4 Note: You cannot unload a disc if it is in a drive. If you wish to unload a disc that is
currently in a drive, follow the directions in “Unmounting discs from Changer drives,”
in the previous section of this guide.