Porter-Cable PCL180L - Manual (Page 10)

10
To replace the bulb:
1. Unscrew the lens holder (2).
2. Turn the bulb until the triangular cutout on
the rim of the bulb lines up with the triangular
notch shown in figure E.
3. Pull the bulb out and insert a new bulb by
lining up the triangular notch and the
triangular cutout. Turn the bulb a half turn to
lock in place.
4. Reinstall the lens holder
NOTE: Do not look directly into the light
beam.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
• Light will not illuminate. • Battery not installed properly. • Check battery
installation.
• Battery not charged. • Check battery
charging requirements.
• Light bulb needs replacing. • Replace bulb as
outlined in this manual.
• Battery will not charge. • Battery not inserted into charger. • Insert battery into
charger until LED appears.
• Charger not plugged in. • Plug charger into a
working outlet. Refer to
“Important Charging
Notes” for more details.
For assistance with your product, visit our website at www.portercable.com for a list of
service centers, or call the Porter-Cable Customer Care Center at (888)
848-5175.
THE RBRC™ SEAL
The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the
NI-CD battery (or battery pack) indicates that the costs to recycle the battery (or battery
pack) at the end of its useful life have already been paid by Porter-Cable.
RBRC™ in cooperation with Porter-Cable and other battery users, has established
programs in the United States to facilitate the collection of spent NI-CD batteries. Help
protect our environment and conserve natural resources by returning the spent NI-CD
battery to an authorized Porter-Cable service center or to your local retailer for recycling.
You may also contact your local recycling center for information on where to drop off the
spent battery.
RBRC™ is a registered trademark of the Rechargeable Battery Recycling Corporation.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
E
90546221 pc1800l pcl180l 1/5/09 12:34 PM Page 10