Palsonic 76WSHD - Manual (Page 29)

10.2 ON timer
10.1 OFF timer
10. TIMER setting
The TIMER setting you have made will restore to default value in about 6 seconds after
you turn off the set.
Press the MENU button (1) to display
the main menu, press VOL or VOL (2)
to select TIMER menu, press CH (3)
to cycle through the menu and select the
desired item.
With the OFF timer, the TV will automatically switch to standby mode at a preset time. The setting
steps are as follows:
In TIMER menu press CH or CH button (3) to select Timer
Off and press VOL or VOL button (2) to set the time after
which you want to turn off the set. (from 10-240 minutes and in
10-minute step). If you want to cancel OFF timer, press VOL
or VOL button (2) until "---" is displayed.
You can also make use of SLEEP timer function to turn off
the set automatically after a preset time, and bring the set to
standby mode. Every time you press the SLP button (4) the
timer will skip to the next one (in 10-minute step) until it reaches
to 240 minutes. Press it again, the timer returns to ---, and the
sleep timer is cancelled.
TIMER OFF 010
TIMER OFF 020
:
:
TIMER OFF 240
TIMER OFF - - -
With the ON timer, the TV which is at standby mode will
automatically turn on at a preset time. The setting steps are
as follows:
Press CH or CH (3) to select Timer On and press
VOL or VOL (2) to set the TV ON time (range from 10-720
minutes and in 10-minute step). If you want to cancel ON timer,
press VOL or VOL (2) until "---" is displayed.
Note: when the ON timer setting is effective, the green timer
indicator will light up to inform the user.
(2)
(3)
(1) (3)
(2)
(4)