Setting the flash mode – Polaroid PDC3080 User Manual

Page 28

Advertising
background image

28

Polaroid PDC 3080 Digital Camera User Guide

www.polaroid-digital.com

29

Polaroid PDC 3080 Digital Camera User Guide

www.polaroid-digital.com

• Setting the Flash Mode

The Flash Range is approximately 3.2

feet to 4.9 feet (1 to 1.5 meters).

1. Turn on the camera.

2. Set the camera to Still Image mode.

3. Press Flash button to cycle

through the flash mode until the

one you want is shown on the LCD

screen.

Flash mode off, the flash does not fire. Use this setting

for outdoor pictures or where flash is prohibited or may be

distracting. Also use when shooting toward a reflective surface,

such as a window or mirror. If you do not have enough light

when using this setting, your pictures will be too dark.

Auto Flash mode, the flash fires automatically as needed. Use

this setting to take most of the pictures.

Flash mode on, the flash fires for every picture. Use this setting

indoors in low light.

Please note that when flash mode is selected, the Status LED turns green

and blinks until the flash finishes charging, then the Status LED will be on

until pressing Shutter button to take a picture.

NOTE:

• Flash modes are not available in Video mode.

• Never touch or block the flash with your fingers. Doing so can soil these

components and interfere with the correct flash operation.

Advertising