Philips DCR 2020 - Manual (Page 28)

62
EN
Software Upgrade
Software upgrade is used to check for new software
availability.
If new software is available:
- Press OK to accept the upgrade.The receiver
restarts.
Factory Settings
Factory settings is used to restore the receiver factory
configuration.
- Press OK when prompted to confirm.
If you reset your receiver to factory settings, you lose
all data and information previously stored, and you have
to restart first installation.
System information
System information is used to display the receiver
reference, software and hardware ID, as well as Total
running time in hours.
DCR 2020_indice1 1/09/05 15:26 Page 62