Pioneer SUPER TUNERIII D DEH-P7950UB - Manual (Page 41)

Black plate (41,1)
Disconnect phone (disconnect phone)
—
Delete phone (delete phone) —PH.B.Transfer
(phone book transfer)
—PH.B.Name view
(phone book name view)
—Clear memory
(clear memory)
—Number dial (call by enter-
ing number)
—Refuse calls (automatic reject
setting)
—Auto answer (automatic answer
setting)
—Ring tone (ring tone select)—
Auto connect (automatic connection setting)
—Echo cancel (echo cancel)—Device info
(device information)
# You can also select the function by pressing
FUNCTION on the remote control.
# PH.B.Name view (phone book name view)
cannot be selected for cellular phone registered
guest phone.
# If cellular phone is connected to this unit via
Bluetooth wireless technology with HSP (Head
Set Profile),
PH.B.Name view, Clear memory,
Number dial and Refuse calls cannot be se-
lected.
# To return to the playback display, press BAND.
# If you do not operate functions except for
Search & Connect, Connection open,
Connect phone, PH.B.Transfer,
Disconnect phone, Number dial and
Clear memory within about 30 seconds, the dis-
play is automatically returned to the ordinary dis-
play.
Connecting a cellular phone
Searching for available cellular phones
1 Use MULTI-CONTROL to select
Search & Connect in the function menu.
2 Press MULTI-CONTROL to search for
available cellular phones.
While searching,
Searching flashes. When
available cellular phones featuring Bluetooth
wireless technology are found, device names
or
Name not found (if names cannot be ob-
tained) are displayed.
# If this unit fails to find any available cellular
phones,
Not found is displayed.
3 Push MULTI-CONTROL up or down to
select a device name you want to connect.
4 Press MULTI-CONTROL to connect the
selected cellular phone.
While connecting,
Connecting flashes. To
complete the connection, please check the de-
vice name (
Pioneer BT Unit) and enter the
link code on your cellular phone. If the con-
nection is established,
Connected is dis-
played.
# The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con-
nection on page 32.
Using a cellular phone to initiate a
connection
1 Use MULTI-CONTROL to select
Connection open in the function menu.
2 Press MULTI-CONTROL to open the con-
nection.
Always waiting is displayed and the unit is
now on standby for connection from cellular
phone.
3 Use cellular phone to connect to this
unit.
# The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con-
nection on page 32.
Disconnecting a cellular phone
1 Use MULTI-CONTROL to select
Disconnect phone in the function menu.
Device name of the connected phone appears
in the display.
2 Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After the disconnection is completed,
Disconnected is displayed.
<CRD4164-A/N>41
Available accessories
En
41
English
Section
03