Powermatic AIR FILTRATION SYSTEM PM1200 - Manual (Page 10)

10
Transmitter Replacement
The remote transmitter provided with your Air
Filtration Unit is pre-programmed and ready to
operate once the battery is installed.
However, should you ever need to replace the
remote transmitter, the new transmitter will need
to be programmed for your Air Filtration Unit.
This is easily done, as follows (Figures 4 and 5):
1. Start the Air Filtration Unit.
2. On the Air Filtration Unit’s control panel,
press and hold the Speed and Timer buttons
simultaneously for 4 seconds, until you hear
a “beep”.
3. Turn on the remote transmitter.
4. You should now be able to operate the
machine using the remote transmitter.
Figure 3
Figure 4
Hole Dimensions
Figure 5